DRILL PRESS SWAGING TOOLS
TRI-ROLLER (AST-DP) *
Drill press or Bridgeport type machine driven tool using the Tri-Roller concept of flaring the lip of a grooved bearing onto the chamfer area of its housing.
Drill press swaging tools can be mounted in regular ½” quills, collets or chucks.
TRI-ROLLER HOUSING OVER THE BEARING (AST-HOB DP) *
As an alternative to anvil staking this swaging tool evenly and controllably cuts into and flares out portion of the housing onto the bearing’s chamfer.
Much higher axial thrust loads are allowed for bearings mounted this way. No gauging, sheering or pitting are present in HOB swaging (opposite when comparing to Ring/ Anvil staking)
Aero Staking ASV tool is made for carbon and stainless steel sleeves or housings where no groove is provided.
This tool slits the ends of sleeve while flaring them onto chamfers of the bearing and of the housing.
No gauging, sheering or pitting are present in HOB swaging (opposite when comparing to Ring/ Anvil staking)
This drill press tool is used for aluminum, copper or bronze bearing sleeve that sticks out above housing surface.
While swaging with these tools bearing retention sleeves are being formed as half donuts on each side of the bearing.
This Aero Staking Tool is made for non-ferrous sleeves and housing where no groove is provided. The tool creases the ends of sleeve while flaring them onto chamfers of the bearing and of the housing. When intermediate sleeve is not present the wheeler flares out portion of housing onto the bearing (HOB)
- Boeing BAC5435 Roller Swage Housing 8.3.1 Fig 6 or 7
- Equivalent to ST932 tools per AS design
FLAT ROLLER ( ASF-DP)*
This Aero Staking tool forms portion of bearing retention sleeve that is being exposed on each side of the housing. This prevents any axial play of the bearing. Sleeve must be wider then bearing and housing bore.
*ALL SWAGERS ARE IN PORTABLE STYLES:
- LIGHT, MOBILE
- NO POWER TOOLS NEEDED
- FITTING CONSTRAINED SPACES
- 6 STYLES
- NO WEAK LINKS
- EASY MAINTNANCE